Videos

Vinyl Remover – promo video for SGIA EXPO Las Vegas 2016 

We made this video for the SGIA EXPO fair in Las Vegas were you could se the Vinyl Remover VR15.

Video from satisfied customer

Another video of a satisfied customer of the Vinyl Remover VR15.

Danish customer sent us two small videos and we put them together.

Video from satisfied customer

Sometimes customers send us videos of the vinyl remover, showing how happy they are about using it.

Here a danish customer sent a video peeling and rolling stickers

Introduction of the vinyl remover VR15.

Vinyl Remover VR15 from vikiallo in Denmark can save you up to 70 % of your time stripping and peeling.

We have tested the Vinyl Remover VR15 with 3M & MACtac film, with Helvetica, Brush Script and Times in letters down to 10mm and up to 100mm capital height. We have also tested print’n cut. We have cut with low knife pressure, so you just barely can see the knife in the liner, this way you don’t have any problems with the liner sticking to the backside of the letters.

The Vinyl Remover VR15 comes in 3 sizes: 850mm, 1430mm and 1700mm

It can be mounted directly on a table with screws, but we also have a magnet adaptor and a table stand for easy moving. And there’s an add-on for holding the media on the back so you can use rolls.
You’ll save time, minimize mistakes and save vinyl.

Book a demo or call for more info at +45 7734 5511 and mail@vikiallo.dk


Tip number 1: Peeling letters

This is tip number 1 for the Vinyl Remover VR15.

A good tip about how to peel letters on the machine.


Tip number 2: How to handle waste

This is tip number 2 for the Vinyl Remover VR15.

A good tip about how to handle your waste from the machine.


Tip number 3: changing the core

This is tip number 3 for the Vinyl Remover VR15.

A good tip about how to change the core on the machine.


Tip number 4: Direction

This is tip number 4 for the Vinyl Remover VR15.

This tip shows de difference between stripping the right direction and the wrong direction.

Tip number 5: Labels

This is tip number 5 for the Vinyl Remover VR15.

This tip shows how easy you can strip labels with the vinyl remover.

Print’n cut labels

See how easy it is to strip print’n cut jobs with the vinyl remover VR15.

Stripping Reflective vinyl on the vinyl remover VR15 – small letters

The vinyl remover VR15 stips a lot of materials.

In this video we show you that it also strips reflective vinyl. Here we have used the 3M 580 reflective vinyl.

This video shows stripping of small letters, you can also se another video where we strip big letters.

Stripping Reflective vinyl on the vinyl remover VR15 – big letters

The vinyl remover VR15 stips a lot of materials.

In this video we show you that it also strips reflective vinyl. Here we have used the 3M 580 reflective vinyl.

This video shows stripping of big letters, you can also see another video where we strip small letters

Cleaning the Vinyl Remover VR15

Here’s a new video showing how to maintain / clean the separationbar to be sure that the Vinyl remover works properly


Video of the vinyl remover with the PolyFlex 401 flexible material.

This video shows the vinyl remover VR15 stripping PolyFlex 401 flexible material for T-shirts and other fabric.

If you have any problems stripping flexible material, please go to our tips page to learn more.


A video from a danish customer who’s very happy with the vinyl remover.

This is a video of a Danish customer who sent us this demonstration as a thank you. Showing how much time they are saving on vinyl stripping.

If you have a video showing your setup, demonstrating how it works for you or something else, please send it to us at mail@vikiallo.dk and will


A couple of videos from another danish customer who’s very happy with the vinyl remover.

Another video of a happy and satisfied client.

Showing how easy it now is for them stripping vinyl and onther materials.